APPLYING WIPE ON POLY - dark stained desk top





My go to product for a hard durable finish on a top surface is ...




Minwax's wipe on poly.
 I remember the first time I used it. It was easy to understand
 and follow the directions that are offered on the can and the
 resulting finish is very hard and durable.

Before

I took photos to share when I applied the
Wipe On Poly to the surface of this old desk.


This surface was stripped and stained first and let to dry.
I recommend using gloves.

#1 wipe away any dust, dirty, 
or left over stain that might be sitting on the surface

**************************************



 I poured the poly on the surface of my project and used a 
folded piece of paper towel to spread it.


I then wipe it from side to side covering
the whole surface in a thin coat.
A thick coat can result in a clouded finish once dried.



If you have freshly stained your piece
your rag will look like this the first time
Nothing to Worry About


leave it dry for 4 hours minimum


once dry, lightly sand the surface 220+ grit
this removes dust particles that might have fallen on to the wet surface before drying. 


re-apply as many times as you like,
waiting 4 hours minimum between coats



always move with the grain



after the final light sanding, apply a coat of wax and buff
 

Each time your finish is drying it collects air born dust 
particles that create a rough texture. Sanding between coats
 will eliminate that roughness and giving it a final coat of wax
 makes it super smooth and soft.

PLEASE NOTE :

Wipe on poly will yellow light colored surfaces.


*********************************

Stop into FIRSTFINDS HARDWARE STORE to see
if we have any vintage hardware for your next project.

CLICK EACH PHOTO FOR MORE INFORMATION
       
CLICK EACH PHOTO FOR MORE INFORMATION  
     

Pin It Now!

Email your Questions or Comments

Name

Email *

Message *

POPULAR ARTICLES

Your first stop for vintage hardware