ANTIQUE BUFFET REPAIRS - leg supports




I took on a furniture project recently
that turned into 8 hours of just wood
working repairs before any beautifying. I'm sharing each repair in different posts. Let's start with the next problem ....










MISSING PARTS

Many pieces of vintage furniture like this one were built with
 a middle support running between the legs right in the 
middle. This cabinet one has lost it's support along the way.


It was probably taken out to gain storage space for boxes or
 baskets, but without something connecting the legs down
 low the structure of the whole piece is compromised.
This buffet is the perfect example of what can happen.


The back of this cabinet has lost one board and the rest are
 sliding down because there is nothing holding the legs 
together. Also the inside shelves are falling because of all the
 missing pieces.

 

MY FIX:

I added a new 2 x 2 between the back legs. This still allows for
 the space to be used and holds everything tight together. I 
screwed mine in place.


I then replaced the missing boards across the back
that also holds up the cabinet shelves.
*************************************************




Here it is put back together and painted







This antique side board is painted in Annie Sloan Pure White.
It has been lightly edge distressed with 220 grit sand paper
 and waxed with clear wax.

 **************************************************************
Other repairs can be found at these links:
SAGGY DRAWER BOTTOMS: CLICK HERE
BROKEN DRAWER JOINTS: CLICK HERE
**************************************************************

*********************************

shabby chic hardware 
  
CLICK EACH PHOTO FOR MORE INFORMATION
 
CLICK EACH PHOTO FOR MORE INFORMATION