REBUIDING ANTIQUE DRESSERS - replacing drawers


Both of these dressers where curb side finds. They were from different homes during a community clean up week and understandably destine for the dump.




It is hard to know where to start explaining what happened.
But I will start where you can SEE there is something wrong.

In this fairy tale picture of the first dresser you see no top drawers.
This is correct ... absolutely no drawers or parts could be found in the rest of the rubble pile. during the time I was strapping her to the roof of my SUV and getting hoots and haulers telling me what a great find I got.
"Ya right buddy get a closer look then tell me that."


I ended up making new drawers!

Okay I did not make brand new ones, that's not what I do here or even what I suggest you do.
I was lucky enough to have some old desk drawers that I was able to make work after cutting.


They were the right height but too long and a bit narrow.

After altering the drawers so they weren't so long I had to
 remove and replace the middle supports inside the dresser because the new drawers were narrower.

Get ready for the technical diagrams ...
if you have a short attention span, just like pretty pictures, or 
simple never plan to do this yourself skip past the next 3 images.


The dresser is laying on a table and on it's back to make working inside easier.

*******************************************************




You have made it past the how things work section ...
Now enjoy the rest of the pictures.


I also removed and replaced the original vertical divider on the front with something wider.

I promise it really is the same dresser.



There are a lot more details to share that went into this dresser and the other, like

repairing broken drawers,
rebuilding a drawer you only have half of,
rebuilding missing applique bits,
gluing veneer down on countless edges
gluing bubbled veneer in the center of a surface
filling in missing veneer
replacing an apron,
and how about
building a complete back for a dresser,
but all this in due time.


****************************************************

Stop into FIRSTFINDS HARDWARE STORE to see
if we have any vintage hardware for your next project. 

     
CLICK EACH PHOTO FOR MORE INFORMATION


Pin It Now!

Email your Questions or Comments

Name

Email *

Message *

POPULAR ARTICLES

Your first stop for vintage hardware